Moldy cause and anti-mildew method after packaging box printing

21-10-2019

     The packaging box will be moldy when placed after printing. What is the reason? How to prevent the mold from being moldy after packaging box printing? Let's take a look at the causes and prevention methods of mold after packaging box printing. I hope to help everyone.


  Moldy cause after packaging box printing


  1. The humidity of the warehouse placed after the packaging box is printed exceeds the standard, and the humidity of the air can easily lead to mildew in the packaging box;


  2. the packaging box itself belongs to the paper material, the humidity is relatively high, when the humidity exceeds 12%, there is a risk of mold;


  3. The jelly gel and animal glue used in the packaging of the paper are rich in protein and starch, which is also the favorite nutrient of the mold, which increases the risk of mildew in the package;

        

packaging box printing


  Anti-mildew method after packaging box printing


  1. The paper should be kept clean and hygienic. The materials in the workshop turnover box should be kept clean and tidy. It is recommended that the surface of the raw material that is not used on the same day should be covered with cloth or plastic film to cover the dust, and the semi-finished products produced should not be placed directly. On the ground, use the pallet or material rack for isolation.


  2. Before using the jelly gel, it is necessary to add 1-2% AEM5700-L glue anti-fungal agent to the glue to cut off the food chain of mold growth, so that it can not breed.


  3. Use the humidity tester to measure the humidity of the paper, and control the humidity of the paper, carton, bamboo and other materials to within 12%. If it is a material that is not used for a long time, use plastic film to wrap the dust and protect it from moisture.


  4. Put a proper amount of mildew-proof desiccant in the carton placed after the packaging box is printed. The anti-mold desiccant not only has strong moisture absorption capacity, but also can greatly reduce the humidity, and adopts meteorological technology to reach moisture and dry to the mold. The agent triggers the release of the components of the door and kills the mold, thereby achieving the purpose of moisture proof and mildew proof.


  5. the use of high-grade flannel materials, velveteen, velvet, flocking fabric, tufted fabric, polyester fabric flannel, etc. can be used, it is recommended to spray AEM5700-F anti-mold anti-bacterial agent on the flannel, because the surface of the flannel is uneven Moisture and dust are the main causes of mildew in the flannel.


  6. When the door of the workshop is separated from the production area, it is necessary to pay special attention to cleanliness and sanitation. Do not have water seepage. The goods cannot be stacked next to the bathroom to avoid the mildew of the product.


  The above is about the cause of mildew after packaging box printing and the method of anti-mildew. I hope everyone can understand the cause of mold after packaging box printing and the method of anti-mildew.


Get the latest price? We'll respond as soon as possible(within 12 hours)